Thermal magnetic circuit breaker to protect wiring installations from overload and short circuit.
It can also be used to control and isolate the installation.

Product features:

• Breaking capacity 6000A according to IEC 60898-1 for domestic installations. Trip limit in case of short circuit between 80A and 160A (curve C between 5 In and 10 In)
• It can be powered either by copper cable, spade connector (top or bottom side), forked connector (bottom side) or Legrand HX3 bridging connector (top side).
• Protected against solid objects larger than 12.5 mm (finger protection): IP20 according to IEC/EN 60529. Maximum level of limitation of the passing energy (energy limitation category 3 according to IEC 60898-1).
• It can be equipped with Legrand DX3 accessories and fittings. It can be connected to an aluminum cable with the Legrand DX3 terminal fitting no. 4 063 10.
• This device complies with substance restriction requirements and has been designed in an environmentally conscious process.

Recommendation / Limitation

This product must be installed in accordance with the installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use may result in a risk of electric shock or fire. Before carrying out the installation, read the instructions and take into account the specific installation location of the product. Do not open, disassemble, modify or alter the device except where specifically required by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorized opening or repair completely voids all obligations and rights to replacement and warranties. Use only Legrand brand accessories.

Technical specifications