Solar Forte Plus Dual Energy Rooftop

It combines high performance, autonomy, ease of installation and economy. It is made of excellent materials, according to international standards and carries all the certificates and test reports that confirm its quality. The boiler has metal side caps that offer a new aesthetic approach.

AVAILABLE MODELS
120lt/2.0m²
160lt/2.6m²
160lt/3.0m²
200lt/3.0m²
200lt/4.0m²
300lt/4.0m²

Are you a professional?

Special prices for professionals - hoteliers

82.00€ – 1350.00€

Water storage tank

General characteristics

Water storage tank GLASS made of cold-rolled steel, 3.0mm thick, with an internal double coating of enamel, baked at 860°C according to DIN 4753. The enamelling is carried out in proprietary high-tech industrial facilities. The boilers are checked one by one as they leave the enamelling unit, ensuring excellent enamel quality.
Perimeter heat exchanger (jacket) made of cold rolled steel, 1.8mm thick, for the operation of the closed circuit, which is imposed in areas where low temperatures occur as well as in areas with high concentrations of salts in the water supply network.

Thermal insulation

Thermal insulation from expanded high-density ecological polyurethane (>50kg/m³) which minimizes thermal losses, maintaining the hot water temperature.
Outer casing from pre-painted sheet metal.

Cathodic protection

Cathodic protection with two magnesium anodes for more effective internal protection against corrosion and scaling caused by electrolysis reactions.

Large round flange

Large round flange (5 holes) intelligent and innovative design for easy cleaning from the salts, rapid replacement of the anode and direct access to the electrical parts.
Full body rubber sealing made of silicone-based, non-toxic material, which does not allow water to come into contact with the flange, protecting it from electrolysis and corrosion.
Electrical resistance power 4kW. All electrical parts are CE marked according to EN 60335-1 and EN 60335-2-21 standards.
Automatic, adjustable thermostat bipolar protection with backup fuse. All electrical parts are CE marked according to EN 60335-1 and EN 60335-2-21 standards.
Protective cap designed to ensure proper ventilation of the electrical section and its protection from weather conditions.
With gasket for the watertight passage of the connection cable of the electrical resistance.

Heat exchanger

Radiator alternator (optional) with 3/4″ BSP male thread connection nozzles to use the heat supplied through central heating systems during winter.

Collector

Strong thermal ecological insulation

Strong thermal ecological insulation pre-compressed stone wool, 50mm thick (back) and 20mm (side) coated with black fiberglass, to minimize thermal losses. Thermal conductivity of stone wool insulation: λ=0.032 W/mK (DIN 56612, measured at 0°C).

Hydroskeleton made of copper or aluminum tubes

The return and supply pipes (headers) they are perforated with expansion outwards, for the ultimate fit heat absorption pipes (manifolds) and avoiding the pressure drop in the collectors.
Distance between tubes (tube pitch) = 107mm (EN 1652).
Single surface absorber which covers the entire surface of the window as well as the supply and return pipes, increasing the absorbent capacity of the collector. Welding is done with state-of-the-art robotic technology equipment laser.

The AELIOS collector, with an aluminum profile, is available in the following models:

AELIOS AL LS with aluminum hydroskeleton
AELIOS CUS with copper hydroskeleton

Special safety glass (Tempered)

Special safety glass (Tempered) high permeability and strength, resistant to adverse weather conditions (e.g. hail, extreme temperature changes).
Glass insulating rubber EPDM with UV protection.

Extrusion cross-sections

Extrusion cross-sections specially designed for easy and safe installation.

Support base & accessories

Cradle

Separate mounts for easy assembly on a horizontal or inclined surface.

Modern computational methods

Designed with the most modern computational methods, where it undergoes physical and electronic checks for stability in extreme weather conditions.

Stainless steel hose

Stainless steel hose 316L with mechanical clamping parts to connect the boiler to the collectors. Easy installation and resistance to high temperatures. It has special insulation of appropriate thickness with UV protection for unlimited weather resistance. Easy installation and resistance to high temperatures.

Fixing handles

Fixing handles advanced design for easy and safe mounting of the collector on the support base.

Specifications

System

Forte Plus 120lt/2m²	GLASS
NUMBER OF COLLECTORS	1
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg)	108 / 231
MAXIMUM HEATER OPERATING PRESSURE (bar)	10
MAX OPERATING PRESSURE CLOSED CIRCUIT (bar)	2.5

Forte Plus 160lt/2.6m²	GLASS
NUMBER OF COLLECTORS	1
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg)	137 / 302
MAXIMUM HEATER OPERATING PRESSURE (bar)	10
MAX OPERATING PRESSURE CLOSED CIRCUIT (bar)	2.5

Forte Plus 160lt/3m²	GLASS
NUMBER OF COLLECTORS	2
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg)	162 / 328
MAXIMUM HEATER OPERATING PRESSURE (bar)	10
MAX OPERATING PRESSURE CLOSED CIRCUIT (bar)	2.5

Forte Plus 200lt/3m²	GLASS
NUMBER OF COLLECTORS	2
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg)	166 / 380
MAXIMUM HEATER OPERATING PRESSURE (bar)	10
MAX OPERATING PRESSURE CLOSED CIRCUIT (bar)	2.5

Forte Plus 200lt/4m²	GLASS
NUMBER OF COLLECTORS	2
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg)	176 / 390
MAXIMUM HEATER OPERATING PRESSURE (bar)	10
MAX OPERATING PRESSURE CLOSED CIRCUIT (bar)	2.5

Forte Plus 300lt/4m²	GLASS
NUMBER OF COLLECTORS	2
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg)	210 / 529
MAXIMUM HEATER OPERATING PRESSURE (bar)	10
MAX OPERATING PRESSURE CLOSED CIRCUIT (bar)	1.5

* System weight measurements have been made with GLASS dual energy boilers and collectors with a copper hydroskeleton.

Water storage tank

WATER STORAGE TANK Plus 120lt	GLASS
DIMENSIONS (mm)	560×916
EMPTY WEIGHT (kg)	58
MANTLE CAPACITY (lt)	8.6
SURFACE OF ALTERNATOR (MANTLE) (m²)	0.62
MAXIMUM TEST PRESSURE (bar)	15
MAXIMUM OPERATING PRESSURE (bar)	10
WATER STORAGE TANK Plus 160lt	GLASS
DIMENSIONS (mm)	580×1116
EMPTY WEIGHT (kg)	72
MANTLE CAPACITY (lt)	12.9
SURFACE OF ALTERNATOR (MANTLE) (m²)	0.91
MAXIMUM TEST PRESSURE (bar)	15
MAXIMUM OPERATING PRESSURE (bar)	10
WATER STORAGE TANK Plus 200lt	GLASS
DIMENSIONS (mm)	580×1356
EMPTY WEIGHT (kg)	84
MANTLE CAPACITY (lt)	18.3
SURFACE OF ALTERNATOR (MANTLE) (m²)	1.28
MAXIMUM TEST PRESSURE (bar)	15
MAXIMUM OPERATING PRESSURE (bar)	10
WATER STORAGE TANK Plus 300lt	GLASS
DIMENSIONS (mm)	580×1970
EMPTY WEIGHT (kg)	120
MANTLE CAPACITY (lt)	25.8
SURFACE OF ALTERNATOR (MANTLE) (m²)	1.79
MAXIMUM TEST PRESSURE (bar)	15
MAXIMUM OPERATING PRESSURE (bar)	10

Collector

COLLECTOR	Plus 1500 AL LS	Plus 1500 CUS
TOTAL AREA (m²)	1.58	1.58
NUMBER OF HEAT ABSORPTION TUBES	8 (Ø10)	8 (Ø8)
MEDIUM OF HEAT TRANSFER	PROPYLENE GLYCOL SOLUTION	PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)	1.14	1.12
ABSORBER SURFACE (m²)	1.33	1.33
OVERALL DIMENSIONS LxWxH (mm)	1530x1030x80	1530x1030x80
TOTAL WEIGHT (without liquid) (kg)	27	28
ABSORBER	ALUMINUM	ALUMINUM
COEFFICIENT OF ABSORPTION / EMISSION	95% ±2% / 5% ±2%	95% ±2% / 5% ±2%
COLLECTOR	Plus 2000 AL LS	Plus 2000 CUS
TOTAL AREA (m²)	02.09	02.09
NUMBER OF HEAT ABSORPTION TUBES	8 (Ø10)	8 (Ø8)
MEDIUM OF HEAT TRANSFER	PROPYLENE GLYCOL SOLUTION	PROPYLENE GLYCOL SOLUTION
CAPACITY	1.34	1.28
ABSORBER SURFACE (m²)	1.80	1.80
OVERALL DIMENSIONS LxWxH (mm)	2030x1030x80	2030x1030x80
TOTAL WEIGHT (without liquid) (kg)	35.5	36.5
ABSORBER	ALUMINUM	ALUMINUM
COEFFICIENT OF ABSORPTION / EMISSION	95% ±2% / 5% ±2%	95% ±2% / 5% ±2%
COLLECTOR	Plus 2600 AL LS	Plus 2600 CUS
TOTAL AREA (m²)	2.6	2.6
NUMBER OF HEAT ABSORPTION TUBES	11 (Ø10)	11 (Ø8)
MEDIUM OF HEAT TRANSFER	PROPYLENE GLYCOL SOLUTION	PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)	1.73	1.64
ABSORBER SURFACE (m²)	2.30	2.30
OVERALL DIMENSIONS LxWxH (mm)	2030x1280x80	2030x1280x80
TOTAL WEIGHT (without liquid) (kg)	44	45
ABSORBER	ALUMINUM	ALUMINUM
COEFFICIENT OF ABSORPTION / EMISSION	95% ±2% / 5% ±2%	95% ±2% / 5% ±2%

Terrace

TYPE	A	B	C	D	E*
120lt/2.0m²	82	113	208	200	221
160lt/2.6m²	105	140	208	200	221
160lt/3.0m²	105	215	153	183	174
200lt/3.0m²	105	215	153	183	174
200lt/4.0m²	105	215	208	200	221
300lt/4.0m²	105	215	208	200	221

*Low Base

Tiled roof

TYPE	A	B	C	D	E
120lt/2.0m²	125	113	260	68	285
160lt/2.6m²	125	140	260	68	285
160lt/3.0m²	125	215	209	68	234
200lt/3.0m²	125	215	209	68	234
200lt/4.0m²	125	215	260	68	285
300lt/4.0m²	125	215	260	68	285

Dimensions in cm

Manufacturer

Forte

Group SKU

100-002-876

Tile Roof Conversion Kit - 006-004-247	Kit Μετατροπής σε κεραμοσκεπές - 006-004-247 quantity	Original price was: 91.70€.Current price is: 82.00€. 27 in stock
Solar Forte Plus Rooftop 120lt/2.0m² Dual Energy - 100-002-876	Ηλιακός Forte Plus Ταράτσας 120lt/2.0m² Διπλής Ενέργειας - 100-002-876 quantity	Original price was: 774.51€.Current price is: 750.00€. 8 in stock
Solar Forte Plus Rooftop 160lt/2.6m² Dual Energy - 100-002-877	Ηλιακός Forte Plus Ταράτσας 160lt/2.6m² Διπλής Ενέργειας - 100-002-877 quantity	Original price was: 851.84€.Current price is: 800.00€. 17 in stock
Solar Forte Plus Rooftop 160lt/3.0m² Dual Energy - 100-002-878	Ηλιακός Forte Plus Ταράτσας 160lt/3.0m² Διπλής Ενέργειας - 100-002-878 quantity	Original price was: 929.36€.Current price is: 850.00€. 10 in stock
Solar Forte Plus Rooftop 200lt/3.0m² Dual Energy - 100-003-077	Ηλιακός Forte Plus Ταράτσας 200lt/3.0m² Διπλής Ενέργειας - 100-003-077 quantity	Original price was: 1080.35€.Current price is: 1000.00€. 2 in stock
Solar Forte Plus Rooftop 200lt/4.0m² Dual Energy - 100-002-879	Ηλιακός Forte Plus Ταράτσας 200lt/4.0m² Διπλής Ενέργειας - 100-002-879 quantity	Original price was: 1161.74€.Current price is: 1050.01€. 4 in stock
Solar Forte Plus Rooftop 300lt/4.0m² Dual Energy - 100-002-880	Read more	Original price was: 2978.84€.Current price is: 1350.00€. Εξαντλημένο

[email protected]

Solar Forte Plus Dual Energy Rooftop

Special prices for professionals - hoteliers

Water storage tank

General characteristics

Thermal insulation

Cathodic protection

Large round flange

Heat exchanger

Collector

Strong thermal ecological insulation

Hydroskeleton made of copper or aluminum tubes

Special safety glass (Tempered)

Extrusion cross-sections

Support base & accessories

Cradle

Modern computational methods

Stainless steel hose

Fixing handles

Specifications

System

Water storage tank

Collector

Terrace

Tiled roof

Boiler Solar Plus

Solar Forte Inox Double Energy Roof

Solar Forte Inox Dual Energy Rooftop

Solar Forte Status Dual Energy Roof

Dual Energy Rooftop Forte Status Solar

Solar Plus collectors

Solar Status Collectors

Solar Forte Plus Dual Energy Rooftop

Special prices for professionals - hoteliers

Water storage tank

Collector

Support base & accessories

Specifications

Terrace

Tiled roof

Related products